Fire-Suit & Accessories
Signature Aluminized Apron
DSZALAP2.0–5.0 · 24 × 36 inch · sold per piece
₹1,100.00/ NOS
Signature aluminized apron · Howrah foundry front-body cover
Aluminized aprons for Howrah pouring and furnace tending
When the job puts radiant heat on the chest at a pour line, tap or furnace door, crews need Signature Aluminized Apron — pure aluminium foil coated, silver, 24 × 36 inch, listed at 600 °C to 800 °C in builds DSZALAP2.0 through DSZALAP5.0. That is front-body cover only: hands belong on the aluminum gloves page, and full wrap-around protection belongs on the aluminium coat page. We manufacture in Ahmedabad and ship to your Kolkata or Howrah delivery address on the order.
Coat and gloves — separate Kolkata pages
DSZALAP covers the front of the torso. Quote hands and full-body layers on their own city pages — do not substitute a coat line for an apron on the same SKU.
City pages: aluminium coat, aluminum gloves.
Front-body jobs that fit DSZALAP
Match layer count to how long the worker faces the heat — not to headcount alone. Each row is its own model and quantity line on the RFQ.
| Job | Apron use | Layer guidance | Note |
|---|---|---|---|
| Hand pouring along a moulding row | DSZALAP3.0 apron worn foil-face-out over work clothes | Move to DSZALAP4.0 if the pourer faces the stream all shift | Add DSZALHG gloves on a separate line — not optional at the ladle. |
| Cupola or induction tap facing the spout | DSZALAP4.0 for steady front exposure at the lip | DSZALAP5.0 when slag splash hits the apron face repeatedly | Full wrap-around cover still belongs on the aluminium coat page. |
| Furnace charging and sampling at the door | DSZALAP2.0 or DSZALAP3.0 for short spells at the opening | Heavier layer if the door stays open through the job | Proximity suit duty is a different product line on the suit PDP. |
| Knock-out and fettling hot castings at the bench | DSZALAP2.0 for front-facing radiant heat at the bench | Step up when the bench faces the melt floor all day | Coat when the worker turns and the back faces the heat too. |
| Stores spare beside the melt floor | Mirror active DSZALAP models already in service | Same layer count per role — count aprons, not people only | Retire delaminated or torn foil before the next heat. |
Howrah foundry pockets and apron lines
Procurement may show a Kolkata office while aprons ship to the Howrah gate — specification follows the pour or furnace job, not the letterhead.
Liluah and Belgachia
Foundry and re-rolling belt, north Howrah
Pouring crews and spout work where the chest faces radiant heat — often paired with coats for tappers.
Apron line: DSZALAP3.0–4.0 at the pour; coat city page for full-body tap crews
Salkia and Benaras Road
Compact cupola floors
Repeat hand pours where the worker walks the mould line facing one direction.
Apron line: DSZALAP3.0 default; gloves from the aluminum gloves city page
Dasnagar and Balitikuri
Foundries beside engineering shops
Bench fettling and knock-out with front-facing heat — classic apron work.
Apron line: DSZALAP2.0–3.0; coat when the job turns away from the bench
Jangalpur and Santragachi
Howrah foundry pockets
Charging and sampling at furnace doors between pours.
Apron line: DSZALAP2.0 for short door spells; step up for long maintenance
Foundry Park, Ranihati–Amta Road
Purpose-built foundry park
New crews kitting out pour stations — quote aprons, gloves and coats on separate lines.
Apron line: DSZALAP by station; do not substitute coat SKUs on apron lines
Uluberia Industrial Park
WBIIDC casting units
Mixed maintenance and pour roles — match layer to time facing the heat.
Apron line: DSZALAP3.0 general issue; adjust per job on the RFQ
DSZALAP layer builds for procurement
Four listed models — same 24 × 36 inch size and temperature window; layer count is the only variant axis. Weight is as per actual on the live product panel.
| Model | Build | Listed temperature | Typical Howrah fit | Order |
|---|---|---|---|---|
| DSZALAP2.0 | 2 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Short front-facing spells — sampling, bench work, light pour windows. | |
| DSZALAP3.0 | 3 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Default pour-line and mould-row crews in Howrah shops. | |
| DSZALAP4.0 | 4 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Steady furnace-door or tap-facing work through a full shift. | |
| DSZALAP5.0 | 5 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Heaviest front radiant load on the apron face for the whole job. |
Pick the right Signature PPE layer
Aluminized apron (this page)
DSZALAP2.0–5.0 front-body cover at 600 °C to 800 °C — 24 × 36 inch, NOS.
Aluminium coat — full body
Closed DSZALC.2L–5L at 700 °C to 900 °C when wrap-around cover is required — different Kolkata city page.
Aluminum gloves — hands only
DSZALHG per pair for tong and ladle grip — different Kolkata city page.
Fire proximity suit
Free-size suit for sustained close heat — product PDP only, not an apron substitute.
Care before each heat
Foil face outward
Wear the pure aluminium foil coated face toward the heat source per site procedure.
Inspect ties and seams
Check before each heat for delamination, burns or torn stitching.
Retire damaged aprons
Pull aprons with cracked foil or open seams — do not patch for melt-floor reuse.
Store flat or hung
Dry storage between shifts; avoid sharp folds that crack the reflective face.
What to send for a quotation
- DSZALAP model
- 2.0, 3.0, 4.0 or 5.0 — one line per layer count if stations differ.
- Quantity
- Pieces per role and shift, plus stores spares.
- Job type
- Pour, tap, furnace door, bench fettling — so layer count matches exposure.
- Gloves and coat
- DSZALHG pairs and DSZALC coat lines separately when the crew needs them.
- Delivery
- Kolkata or Howrah pin on the PO; required-by date for quotation.
Dispatch from Ahmedabad
Aprons are made in Ahmedabad and shipped to the address on the order — no Howrah shelf. Courier bands are on the shipping and delivery policy.
Guides and policies
Metal and foundry
Heat and hot-work PPE context for foundry procurement.
Open industry pageFire suits and accessories
Browse all Signature aluminized coats, aprons, gloves and suits.
Browse fire suits and accessoriesShipping and delivery policy
Processing window and India courier estimate bands.
Open shipping policyContact form
Multi-line RFQ with DSZALAP models, counts and delivery address.
Open contact form
Frequently asked questions
Which DSZALAP model fits front-body cover at a Howrah pouring line?
Start with DSZALAP3.0 or DSZALAP4.0 — pure aluminium foil coated, silver, 24 × 36 inch, listed at 600 °C to 800 °C — when the pourer faces the heat for a full shift. Use DSZALAP2.0 for shorter bench spells; step to DSZALAP5.0 when radiant load on the apron face is heaviest. Sold per piece (NOS). Weight is as per actual on the live panel — do not invent kg.
How is this page different from the Kolkata aluminium coat city page?
The coat page is for closed DSZALC body cover at 700 °C to 900 °C when the whole torso and arms need wrap-around protection. This page is only the Signature Aluminized Apron for front-facing torso cover at 600 °C to 800 °C — not a substitute for a full coat.
Where do Howrah crews order aluminum gloves?
Hands stay on Signature Aluminum Gloves DSZALHG — see the Kolkata aluminum gloves city page and product PDP. Add glove pairs on a separate quotation line whenever the apron is worn at the furnace or pour.
When should we use a fire proximity suit instead of an apron?
Sustained close work that needs a free-size suit belongs on the Signature Fire Proximity Suit PDP — not this apron page. Aprons cover the front of the body at a pour, tap or bench; they do not replace a full proximity suit programme.
Is DSZ stock available in Kolkata or Howrah?
No local shelf, branch or warehouse. We manufacture in Ahmedabad and ship to the foundry or stores address on the order. Need it urgently? Contact our sales team to discuss your requirement and available dispatch options.
When does a West Bengal apron order leave Ahmedabad?
Processing is 1–2 business days after payment. Shipping policy courier estimates are 1–3 days local, 2–5 within the state and 3–7 for the rest of India — estimates only. Quotation confirms dispatch, not arrival day.
How do we quote aprons for three pouring stations?
One line per DSZALAP layer model and quantity — 2.0, 3.0, 4.0 or 5.0 per station if builds differ. Add DSZALHG glove pairs and DSZALC coat lines separately when the crew needs them. Do not mix coat SKUs onto the apron line.
What should we inspect before each use?
Check the silver foil face, ties and seams for burns, delamination or tears. Retire aprons with compromised coating — there is no fixed reuse cycle on the spec sheet. Store dry and avoid sharp folds that crack the foil.
Do you claim EN or IS product certifications on this page?
No invented product-level EN/IS certifications for DSZALAP. Company ISO 9001:2015 supports vendor onboarding on /certificates. Put any tender standard on the RFQ for confirmation against live product panels only.
What should a Howrah aluminized apron quotation include?
DSZALAP model, piece count, the job (pour, tap, furnace tending or bench fettling), glove pairs if needed, delivery pin in Kolkata or Howrah, and required-by date. Full-body cover belongs on a separate coat quotation — not mixed as an apron substitute.
Quote aluminized aprons for Howrah pour and furnace crews
Send DSZALAP model, piece count, job type and delivery address. Manufactured in Ahmedabad — no local shelf required to order.