Signature Insulation Tape · Mina Abdullah
Silicone tape for Mina Abdullah process pipes, steam lines and flanges
Turnaround contractors at Mina Abdullah wrap process pipes, steam lines, flanges and hot equipment with a narrow tape once the surface is ready. Signature Insulation Tape, model DSZSFG0.6, is that roll: silicone-coated fiberglass, gray, 0.6 mm, 25 mm by 20 m, listed at 550 °C to 900 °C, sold by the kilogram. We make it at our Ahmedabad factory and ship it on the order. The quotation carries the kilograms.
Uncoated fiberglass and ceramic fiber are other tapes
Live cards for those two products. DSZSFG0.6 stays the silicone roll on the hero. A Mina Abdullah order names which tape, then the kilograms.
Turnaround joints that take the 25 mm roll
Process units, residue desulfurization, the hydrogen plant, the sulfur block, and utilities are the settings inside Mina Abdullah. A place name is the joint being wrapped. The silicone roll is the same on every row.
| Place | Setting | Wrap job | Start with |
|---|---|---|---|
| Process units | The Mina Abdullah refinery, at 454,000 barrels a day, with 42 new units and 2 upgraded units after the 2022 clean-fuels commissioning. | Turnaround wrap on process-pipe runs and flange joints. The tape is the 25 mm silicone roll, counted in kilograms. | DSZSFG0.6 by the kilogram |
| Residue desulfurization | Atmospheric residue desulfurization units that convert residue and fuel oil into higher-value products. | Flange and joint wrap on those hot residue lines while a unit is open for maintenance. | DSZSFG0.6, 0.6 mm, 550 °C to 900 °C |
| Hydrogen plant | Steam reformers in the hydrogen plant, with the sulfur block and utilities built beside them. | Steam-line wrap around the reformers. Overlap follows the site insulation procedure. | DSZSFG0.6 on the steam line |
| Sulfur block | Sour-water stripper, amine regeneration and sulfur recovery, in the same package as the hydrogen plant. | Detailing on hot equipment and flanges. Inspect the silicone coating before the roll goes back on a joint. | DSZSFG0.6, retired if the coating is torn |
| Utilities and off-sites | Utility and off-site headers that carry steam and other services for the process units. | Narrow wrap on steam lines during a turnaround. The same gray 25 mm roll, ordered by the kilogram. | DSZSFG0.6, with the metal temperature on the enquiry |
The roll the factory lists
Specify DSZSFG0.6 and the kilograms. The category is Insulation Cloths. The coating is silicone, on fiberglass, in gray. It is not ceramic fiber tape. Darshan Safety Zone holds ISO 9001:2015 for the company quality system.
| Field | From the factory listing |
|---|---|
| Model | DSZSFG0.6, silicone-coated fiberglass |
| Roll | Gray, 0.6 mm, 25 mm wide, 20 m long, 1 kg |
| Temperature | 550 °C to 900 °C |
| Order unit | Kilogram. Widths other than 25 mm are not published. |
| HSN | 70191900 |
| Adhesive rating | Unpublished. Do not treat the roll as a rated adhesive. |
| Hazardous-area approval | Not listed |
Silicone wrap, uncoated fiberglass, or ceramic fiber
Three tapes, three jobs. DSZSFG0.6 is the silicone-coated fiberglass roll for the Mina Abdullah joints on this page. The other two are separate product pages, also sold by the kilogram.
| Model | Listed build | Mina Abdullah job | Order |
|---|---|---|---|
| DSZSFG0.6 | Silicone-coated fiberglass · gray · 0.6 mm · 25 mm × 20 m · 550 °C to 900 °C · per kilogram | Narrow wrap and seal on process pipes, steam lines, flanges and hot equipment during a Mina Abdullah turnaround. | Request quoteOpen product |
| DSZFTP3.25 | Uncoated fiberglass · white · 25 × 3 mm · about 15 m in a kilogram · 550 °C to 900 °C | When the spec asks for fiberglass with no coating. Other widths sit on that product page. | Request quoteOpen product |
| DSZCTP3.25 | Ceramic fiber · white · 25 × 3 mm · about 25 m in a kilogram · 1260 °C to 1760 °C | When the metal sits in that higher band. This is not DSZSFG0.6. | Request quoteOpen product |
On the joint, and back in the store
On a clean joint
Wrap DSZSFG0.6 on a clean, dry pipe, flange or equipment surface. Overlap each turn the way the site insulation procedure requires.
Before the next outage
Look for tears in the silicone coating or the fabric, and for contamination. A damaged roll leaves service.
In the contractor store
Keep rolls dry and away from sharp edges until the next Mina Abdullah turnaround window.
Lines on the turnaround quotation
Catalogue prices stay on the product cards. The quotation is how a Mina Abdullah contractor orders. It confirms the model, the kilograms, and shipment from Ahmedabad.
Line 1
Model
DSZSFG0.6 for the silicone wrap. Name DSZFTP or DSZCTP only when that other tape is the spec.
Line 2
Kilograms
How many kilograms. One published roll is 25 mm by 20 m and 1 kg.
Line 3
The joint
Process pipe, steam line, flange, or hot equipment.
Line 4
The area
Process units, residue desulfurization, hydrogen-plant reformers, the sulfur block, or utilities.
Line 5
Metal temperature
So the 550 °C to 900 °C band can be read against the line.
Line 6
Dispatch
The quotation confirms shipment from Ahmedabad and the production schedule for a turnaround quantity.
Made in Ahmedabad, shipped on the order
Darshan Safety Zone manufactures Signature Insulation Tape at our Ahmedabad factory (401 & 402, Golden Plaza, Amar Jawan Circle, Nikol -, Ahmedabad, India). Mina Abdullah has no Darshan Safety Zone warehouse, branch or shelf, and we do not state a Kuwait arrival day. Transit follows the freight and customs path on the quotation.
Import duties and taxes are yours. Availability depends on the product category and on the regulations that apply to the shipment. Bulk and project quantities follow the production schedule on the quotation. Our shipping and delivery policy covers how an order leaves the factory. The quotation confirms dispatch.
Guides for refinery maintenance contractors
Insulation cloths
The Signature range that holds this silicone tape.
Browse insulation clothsReading temperature ratings
How a printed band is read. DSZSFG0.6 prints 550 °C to 900 °C.
Open guideOil and gas
How oil and gas maintenance plans wrap on hot lines.
Open industry journeyTalk to our team
Use this while the turnaround kilograms are still being counted.
Open contact form
Questions from Mina Abdullah turnaround contractors
What roll do we name for a Mina Abdullah turnaround joint?
DSZSFG0.6. It is silicone-coated fiberglass, gray, 0.6 mm thick, 25 mm wide and 20 m long, listed at 1 kg a roll and at 550 °C to 900 °C. The sale unit is the kilogram. HSN 70191900.
How is the quantity written?
In kilograms of DSZSFG0.6. One published roll is 25 mm by 20 m and 1 kg. Widths other than 25 mm are not published for this model. The quotation confirms the kilograms and shipment from Ahmedabad.
Is DSZSFG0.6 ceramic fiber tape?
No. DSZSFG0.6 is silicone-coated fiberglass in the insulation-cloths range. Signature Ceramic Fiber Tape is a different product, white, with a listed band of 1260 °C to 1760 °C, sold by the kilogram under ceramic products. Use that page only when the job calls for that band.
When is the uncoated fiberglass tape the other roll?
When the spec is fiberglass with no coating. Signature Fiberglass Tape is white, adhesive coating listed as none, and the same 550 °C to 900 °C band, sold by the kilogram. DSZFTP3.25 is 25 × 3 mm, with about 15 m in a kilogram. It is not the silicone 0.6 mm roll.
Does this tape carry a hazardous-area approval?
No hazardous-area approval is listed on DSZSFG0.6. The site permit decides where the wrap may go. Darshan Safety Zone holds ISO 9001:2015 for the company quality system. That is not a product approval for this tape.
Is there a warehouse in Kuwait or a stated arrival day?
We manufacture in Ahmedabad and ship on the order. There is no warehouse, branch or shelf at Mina Abdullah or elsewhere in Kuwait, and we do not state a Kuwait arrival day. Transit follows the freight and customs path confirmed on the quotation.
Who pays import duty?
Import duties and taxes are yours. We do not quote a landed cost here. Availability also depends on the product category and on the regulations that apply to the shipment.
What should a turnaround contractor send?
Kilograms of DSZSFG0.6, the joint type (process pipe, steam line, flange or hot equipment), and the area: process units, residue desulfurization, the hydrogen-plant reformers, the sulfur block, or utilities. Add the metal temperature if it sits near the top of 550 °C to 900 °C. Bulk quantities follow the production schedule on the quotation.
How is the tape put on, and when does it leave service?
Wrap a clean, dry surface and overlap the turns the way the site insulation procedure requires. Before reuse, look for tears in the coating or the fabric, and for contamination. A damaged roll leaves service. Keep spare rolls dry and away from sharp edges.
Where do we read the temperature band before we count kilograms?
Our guide to reading temperature ratings explains a printed band. DSZSFG0.6 prints 550 °C to 900 °C. The ceramic fiber tape prints 1260 °C to 1760 °C. Those are two products. The kilograms for Mina Abdullah wrap belong on the silicone-tape quotation.
Quote silicone tape for a Mina Abdullah turnaround
Send the kilograms of DSZSFG0.6, the joint, and the metal temperature. We quote shipment from the Ahmedabad factory.