Signature Medium Duty Welding Blanket

Description

Welding bays, fabrication floors, and maintenance zones need blanket coverage that stops sparks and spatter from reaching equipment, cables, and adjacent work — without the wrong material for the duty. Signature Medium Duty Welding Blanket is built for that middle ground: stronger than light-duty throw cloth, sized for everyday weld protection under the Welding Blanket category.

Model DSZMDWB2.4 is 2.4 mm at 1300 GSM in a practical brown finish with vermiculite coating on non-metallic fabric reinforcement — a combination procurement can name on the PO and stores can reorder without guessing construction.

Rated for 900 °C to 1000 °C, this blanket sits in the medium-duty band for welding spark, molten spatter, and radiant-heat shielding — the kind of coverage fabrication crews deploy around the arc, not just for show on a spec sheet.

You size the blanket to your bay. On this page, enter the length and width you need in metres — shield a weld table, cover adjacent equipment, or line a temporary spark barrier — and order the piece that matches your layout. API reference roll format is 1 × 50 meter for catalogue context; your order follows the dimensions you set on the buy box.

Non-metallic reinforcement makes this SKU a sensible choice where metallic inclusions are unwelcome — electrical-adjacent welding, mixed maintenance bays, and sites that standardize on non-metallic weld blankets for medium-duty programmes.

For welders, fabrication supervisors, and HSE teams stocking Welding Blanket SKUs, Signature Medium Duty Welding Blanket means one clear model — DSZMDWB2.4 — vermiculite coated, brown, 2.4 mm, non-metallic build.

Manufactured under the Signature brand by Darshan Safety Zone — medium-duty welding protection you can specify once and reorder with confidence.

Features

• Model DSZMDWB2.4 — 2.4 mm, 1300 GSM
• Vermiculite coated brown finish
• Non-metallic fabric reinforcement
• Working temperature 900 °C to 1000 °C
• Order by length × width — sold per piece
• Medium-duty weld spark and spatter protection

Use cases

• Weld table and bench shielding — lay blanket coverage where sparks fall during medium-duty work
• Equipment and cable protection — cover adjacent plant during grinding and welding
• Fabrication floor spark barriers — size a sheet to the zone you need to isolate
• Maintenance shutdown hot work — stock named DSZMDWB2.4 for repeat jobs
• Non-metallic weld programmes — specify where metallic reinforcement is not wanted

How to use

1. Confirm model DSZMDWB2.4 for medium-duty welding blanket duty.
2. Enter length and width in metres on this page for the coverage area you need.
3. Deploy the blanket per site hot-work procedure on a clear area; keep edges secured and overlaps adequate for spark catch.
4. Inspect for burns, holes, or coating damage before each use.
5. Retire damaged blankets; store dry and flat between jobs.

Specifications