Signature Silicon Coated High Silica

Description

When insulation duty sits in extreme heat — far beyond everyday fiberglass wraps — Signature Silicon Coated High Silica delivers high-silica industrial fabric with a silicon coating for Non-Asbestos Fabric programmes. Sold by the square metre, specified by thickness, and built for plants that need a clear model trail.

The base is high-silica fabric finished with a Silicon Coated face in a practical grey colour. Both listed models share a documented working temperature of 1100 °C to 1860 °C — use that API range as the buying fact, not guesswork from older catalogue blurbs.

Choose thickness for mass and handling: DSZSHS96.0.8 at 0.8 mm (800 GSM), or DSZSHS96.1.4 at 1.4 mm (1430 GSM). Step up when the duty needs more fabric mass; stay at 0.8 mm when wrap flexibility and lighter roll weight matter.

Roll size is 1 × 50 meter on both variants. Unit of sale is SQM. This is coated high-silica fabric — not a finished fire blanket SKU — so keep purchase orders and stores language on cloth and area, not blanket kits.

Signature keeps the line simple: two named models, silicon coating, high-silica base, and a temperature window you can write into an indent. Manufactured under the Signature brand by Darshan Safety Zone for industrial heat insulation buyers.

Specify DSZSHS96.0.8 or DSZSHS96.1.4 when silicon-coated high-silica fabric is required for extreme-temperature insulation under Non-Asbestos Fabric — catalogue-consistent and work-ready for plant matrices.

Features

• Silicon coated high-silica fabric
• Working temperature 1100 °C to 1860 °C
• Thicknesses 0.8 mm and 1.4 mm
• Weights 800 GSM / 1430 GSM
• Roll 1 × 50 m — grey finish
• Models DSZSHS96.0.8 / DSZSHS96.1.4 — sold per sqm

Use cases

• Extreme-temperature insulation wraps — fabric layer where high-silica performance is specified
• Furnace and foundry heat zones — coated cloth for industrial heat protection programmes
• Thermal pads and barriers — cut-to-size fabric for local heat shielding
• Steel, power, and glass plants — non-asbestos fabric stocking for high heat
• Plant standardization — two thickness SKUs for stores and contractors

How to use

1. Select model DSZSHS96.0.8 or DSZSHS96.1.4 for thickness and GSM.
2. Cut and install on clean surfaces per the site insulation procedure.
3. Inspect the silicon-coated face and fabric before use.
4. Replace damaged material; store dry and avoid sharp folds.

Specifications