Fire-Suit & Accessories
Signature Aluminized Apron
DSZALAP2.0–5.0 · 24 × 36 inch · sold per piece
₹1,100.00/ NOS
Signature aluminized apron · Mumbai and MMR
Aluminized aprons for Mumbai homes and small workshops
Across the MMR — society basements, suburban flats and lane-shop garages — buyers need front-body radiant-heat cover they can hang beside a bench, not a foundry melt-floor kit. Pick a DSZALAP layer build (24 × 36 inch, 600 °C to 800 °C), add gloves on a separate line when hands work near the heat, and we manufacture in Ahmedabad and ship to your delivery address on the order.
Coat and gloves — separate products
Quote hands and full-body layers on their own product pages — do not substitute a coat SKU for an apron on the same line.
Two Mumbai buying rhythms
Suburban society basements and stilt shops
Andheri, Goregaon, Mulund and Navi Mumbai redevelopments — RW A store cupboards above stack parking, stilt tailors and repair counters. Front-body cover for short bench spells, not Taloja refinery fire-watch kit.
Island-city lane shops and home garages
Bandra, Dadar and Lower Parel mixed-use lanes with a back-room grinder or narrow garage — one DSZALAP on a hook beats borrowing industrial PPE from a cousin’s foundry apron page.
Places that order aprons here
Andheri redeveloped society stores
Western suburbs — basement cupboards
Electrical or housekeeping shelves above parking — front-body cover for contained maintenance, not daily melt-floor duty.
Start: DSZALAP2.0 or DSZALAP3.0
Thane and Navi Mumbai stilt counters
Ground-floor retail under towers
Short spells at a repair counter while heat reflects toward the chest.
Start: DSZALAP3.0
Goregaon lane home garages
Mixed plots with attached parking
Weekend bracket welding or angle-grinder work facing the bench — front-body cover only.
Start: DSZALAP2.0–3.0
Mulund and Bhandup society offices
RWA store rooms above parking
Standby apron beside the panel — quote one piece per store room, not one average for the tower.
Start: DSZALAP2.0
Bandra mixed-use lane shops
Shop plus back-room workshop
Shelf stock for brazing or heating jobs that face one direction — pair gloves on a separate line.
Start: DSZALAP2.0
Powai managed-building back-of-house
Facility maintenance stores
Contained hot-work maintenance — not a substitute for the building fire plan.
Start: DSZALAP3.0
Front-body jobs at home and in small shops
| Job | Apron use | Layer guidance | Note |
|---|---|---|---|
| Garage angle-grinder facing the bench | DSZALAP2.0 for short front-facing sparks and radiant bounce | DSZALAP3.0 when the session runs past an hour | Hands need DSZALHG gloves on the product page — not optional at the wheel. |
| Stilt-shop brazing at the counter | DSZALAP3.0 foil-face-out over work clothes | DSZALAP4.0 if slag or heat reflects on the apron all shift | Full wrap-around jobs belong on the aluminium coat product, not this apron line. |
| Society store hot-work maintenance | DSZALAP2.0 for brief panel or duct work facing the source | Step up only if the task runs longer than planned | Quote one piece per store room size, not one average for the whole tower. |
| Lane-shop metal art or hobby forge | DSZALAP3.0 default for front-facing radiant heat at the piece | DSZALAP5.0 when the reflective load on the apron face is heaviest | This page is home and small-workshop buying across the MMR — not Taloja industrial apron kitting. |
Pick a layer band, then a model
Light — cupboard and short bench
DSZALAP2.0
2 layer · 24 × 36 inch · 600 °C to 800 °C
Brief spells in a store room or quick garage job.
Everyday home and stilt shop
DSZALAP3.0
3 layer · pure aluminium foil coated · silver
Default for suburban MMR small workshops facing the bench.
Longer front-facing sessions
DSZALAP4.0 to DSZALAP5.0
4–5 layer · same size and temperature window
When radiant load on the apron face stays high through the job.
DSZALAP models to quote
| Model | Build | Listed temperature | Typical fit here | Order |
|---|---|---|---|---|
| DSZALAP2.0 | 2 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Short bench or store-room spells. | |
| DSZALAP3.0 | 3 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Default Andheri or Goregaon small-workshop issue. | |
| DSZALAP4.0 | 4 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Steady front-facing heat through a longer session. | |
| DSZALAP5.0 | 5 layer · pure aluminium foil coated · silver · 24 × 36 inch | 600 °C to 800 °C | Heaviest reflective load on the apron face for the whole job. |
Choose the right Signature PPE layer
Aluminized apron (this page)
DSZALAP2.0–5.0 front-body cover at 600 °C to 800 °C — 24 × 36 inch, NOS.
Aluminium coat — full body
Closed DSZALC.2L–5L at 700 °C to 900 °C when wrap-around cover is required — separate product PDP.
Aluminum gloves — hands only
DSZALHG per pair for grip near heat — separate product PDP, not an apron substitute.
Signature Aluminized Apron — pack facts
- Four DSZALAP models — layer count is the only variant axis; size stays 24 × 36 inch on every build.
- Pure aluminium foil coated, silver finish; sold per piece (NOS). Weight is as per actual on the live panel — do not invent kg.
- Listed working temperature 600 °C to 800 °C on each variant — do not invent a separate radiant figure.
- Front-body apron only — not closed coat coverage and not hand protection.
- Manufactured in Ahmedabad and shipped to your Mumbai or MMR delivery address on the order.
What to send for a quotation
- DSZALAP model
- 2.0, 3.0, 4.0 or 5.0 — one line per layer count if benches differ.
- Quantity
- Pieces per garage, shop or store room, plus any spare on the hook.
- Where it is used
- Garage, stilt counter, society store or lane workshop — so layer count matches the job.
- Gloves
- DSZALHG pairs on a separate line whenever hands work near the heat.
- Delivery
- Mumbai or MMR pin and required-by date for quotation.
Dispatch to Maharashtra
No Mumbai warehouse — aprons ship from Ahmedabad to the address on your order. Courier bands are on the shipping and delivery policy.
Related guides
Fire suits and accessories
Browse Signature aluminized coats, aprons and gloves.
Browse fire suits and accessoriesShipping and delivery policy
Processing window and India courier estimate bands.
Open shipping policyContact form
Multi-line RFQ with DSZALAP models, counts and delivery address.
Open contact form
Frequently asked questions
Which DSZALAP model fits a Goregaon or Andheri home garage bench?
Start with DSZALAP2.0 or DSZALAP3.0 — pure aluminium foil coated, silver, 24 × 36 inch, listed at 600 °C to 800 °C — when radiant heat hits the chest for short spells at a bench. Step to DSZALAP4.0 if you face the source through a longer session. Sold per piece (NOS); weight is as per actual on the live panel.
How is this page different from the Mumbai aluminium coat city page?
The aluminium coat city page is for full wrap-around DSZALC body cover at 700 °C to 900 °C in homes and workshops. This page is only the Signature Aluminized Apron for front-facing torso cover at 600 °C to 800 °C — not a substitute for ordering a coat on the same line.
Do we need aluminum gloves with the apron?
Yes whenever your hands are near the heat source — order Signature Aluminum Gloves DSZALHG on the product PDP as a separate pair line. The apron does not protect fingers at the grinder or torch.
Is this the same as foundry or steel-plant apron pages?
No. Industrial foundry and steel procurement uses different locality pages tuned to melt-floor and cast-house jobs. This page is for Mumbai households and small workshops — society basements, stilt shops and suburban garages across the MMR — not Taloja refinery maintenance kitting.
When should we order a coat instead of an apron?
Choose Signature Aluminium Coat on its product page when the job needs closed body and arm cover at 700 °C to 900 °C, not just the front of the torso. An apron stays the lighter front-body layer for bench-facing radiant heat.
Is there DSZ stock in Mumbai or Navi Mumbai?
No local shelf, branch or warehouse. We manufacture in Ahmedabad and ship to the address on the order. The product remains available to order. Need it urgently? Contact our sales team to discuss your requirement and available dispatch options.
When does a Maharashtra apron order leave Ahmedabad?
Processing is 1–2 business days after payment. Shipping policy courier estimates are 1–3 days local, 2–5 within the state and 3–7 for the rest of India — estimates only. Quotation confirms dispatch, not arrival day.
How do we quote aprons for two garage benches and one society store?
One line per DSZALAP model and quantity — 2.0, 3.0, 4.0 or 5.0 if layer counts differ by bench. Add DSZALHG glove pairs separately when hands work near the heat. Do not mix coat SKUs onto the apron line.
Do you claim EN or IS product certifications on DSZALAP?
No invented product-level EN/IS certifications for DSZALAP on this page. Company ISO 9001:2015 supports vendor onboarding on /certificates. Put any tender standard on the RFQ for confirmation against live product panels only.
What should a Mumbai aluminized apron quotation include?
DSZALAP model, piece count, where it will be used (garage, stilt shop, society basement or lane workshop), glove pairs if needed, delivery pin in Mumbai or MMR, and required-by date. Full-body cover belongs on a separate coat quotation.
Quote aluminized aprons for Mumbai or the MMR
Send DSZALAP model, piece count, place type and delivery address. Manufactured in Ahmedabad — order without a local shelf.