Darshan Safety Zone
Back to Insightsheavy duty welding blanket
Stock Heavy Duty Welding Blanket
In this article
A heavy duty welding blanket is the brown vermiculite sheet you stage when a Selaqui fabrication bay throws sparks onto floors and plant kit.
You may be writing the indent for a Dehradun industrial-belt weld shop, a boiler outage pad, or a night grinding bay that still runs after the day shift leaves. The blanket does not change with the pin code. Match thickness, length and width, and the duty your hot-work method already names.
Jobs this blanket covers on Selaqui bays

You are the person who names the blanket on the requisition for a Selaqui fabrication bay or a Dehradun maintenance pad. A fire blanket smothers a small fire. A medium-duty welding blanket is a different Signature line. This indent is for the heavy vermiculite welding blanket when sparks, slag, and radiant heat need a brown coated sheet beside the arc.
Signature Welding Blanket is a vermiculite-coated ceramic-fiber weld blanket family under Welding Blanket. It is brown. It is sold per piece with length and width ordering. It is not Signature Medium Duty Welding Blanket, and it is not a fire-blanket SKU.
Put it on the workplaces this blanket is listed for.
- Heavy welding and fabrication spark and spatter shielding: bay floors, adjacent kit, and hanging faces that catch slag.
- Foundries, steel mills, and aluminium processing: hot-work pads where metal stays hot beside the weld.
- Shipyards, refineries, and power-plant maintenance: outage windows that need a named welding blanket on the permit.
- Boiler and vessel hot-work protection: temporary covers around nozzles, manways, and adjacent surfaces.
- Chemical and industrial welding blanket programmes: plant HSE kits that stock heavy DSZVCF sheets by size.
Walk the bay before you raise the indent. Outside a Dehradun shed the morning air can feel mild. Inside a Selaqui weld bay on night shift, sparks still travel onto timber staging, cable trays, and finished paint. Write whether the sheet sits under the joint, hangs as a curtain, or covers adjacent plant, and whether medium-duty PPE would leave the heat window short.
If the drawing already calls for Signature Medium Duty Welding Blanket or an industrial fire blanket, stop. Those are different SKUs. Swapping a smothering fire blanket for a welding spark sheet, or a medium-duty sheet for this heavy line, breaks the method.
On the indent, write the job in plain words, such as “Selaqui fabrication spark catch, heavy welding blanket by L × W”. That line stops the wrong form leaving stores.
Match DSZVCF thickness to the heat

Write the model the way the catalogue lists it. Signature Welding Blanket is sold per piece (NOS). Enter length and width in metres on the product page. Colour is brown. Coating is vermiculite. Primary catalogue pick for many plant indents is DSZVCF3.2.
Choose thickness and weight for the duty in front of you. Working temperature is listed per model.
- DSZVCF2.5 — 1000 GSM, vermiculite, reference 1 × 2 m, working temperature 1200 °C to 1760 °C
- DSZVCF2.8 / DSZVCF3.0 / DSZVCF3.2 — about 3.0–3.2 mm, 1100–1500 GSM, SS Metallic Reinforced, reference 1 × 30 m, 1260 °C to 1760 °C
- DSZVCF4.0 / DSZVCF4.5 / DSZVCF5.0 — 4.0–5.0 mm, 1700–2200 GSM, SS Metallic Reinforced, reference 1 × 30 m, 1260 °C to 1760 °C
The 1 × 30 m and 1 × 2 m figures are panel reference sizes. Order the L × W your bay method needs. Roll-format builds from DSZVCF2.8 upward list SS metallic reinforcement. Match the thickness to the spark load and stand-off your HSE officer already signed — a heavier sheet is not always the better pick for every short grind pad, and a lighter sheet is not always enough for foundry spatter.
Order this blanket as this blanket. Do not indent medium-duty DSZMDWB under this product name because both say welding blanket.
Write the model number and length × width in metres. A line that only says “welding blanket Dehradun” will be guessed in stores.
Stage the sheet for spark catch

Hand the fire-watch the model that matches the indent before the first electrode is struck. On a Selaqui night bay, the blanket only works if it is in place before sparks start, not after the first slag hits the floor.
- Step 1: Match the model and the cut size to the indent before anyone opens the pack.
- Step 2: Stage the sheet under the joint, beside the grind pad, or as a hanging face the way your hot-work procedure already says.
- Step 3: Secure edges so draught from open shed doors cannot lift a corner into the spark path.
- Step 4: Leave the sheet in place through cool-down per your fire-watch method. Do not peel early to “check”.
- Step 5: After use, inspect for burn-through, frayed edges, or oil soak. Retire a damaged piece; do not fold it back into the bay kit.
Store dry, folded or rolled, with the model written on the bin. A cool hillside morning outside the estate does not mean the next weld window can start with an unmarked damaged remnant from last week. If a quote arrives for medium-duty welding blanket under this heavy product name, stop — that is a sibling SKU with a different temperature window.
If a corner lifts after staging, reseal the edge. Do not leave a gap open and call the spark catch done.
Made in Ahmedabad, sent to site

Signature Welding Blanket is made by Darshan Safety Zone in Ahmedabad, under the Signature brand. The company has made fire safety and heat protection products since 2012, and its quality system is certified to ISO 9001:2015.
Orders can be dispatched across India, including to a site in Dehradun, and freight is confirmed in the quotation. There is no counter in Dehradun, and there is no same-day promise.

Discussion (0)
Join the conversation
Sign in to leave a comment for our applications team.
Sign in to comment