Darshan Safety Zone
Back to Insightsceramic fiber tape
Stock Ceramic Fiber Tape
In this article
A ceramic fiber tape is the white DSZCTP coil you wrap when a Selaqui boiler flange or furnace line needs extreme-heat sealing by the kilogram.
You may be writing the indent for a Dehradun industrial-belt boiler house, a kiln pipe rack, or a refractory maintenance kit that still runs night outages. The tape does not change with the pin code. Match width, thickness, and the kilograms your wrap actually needs.
Jobs this tape covers on Selaqui lines

You are the person who names the tape on the requisition for a Selaqui boiler house or a Dehradun furnace line. Fiberglass tape suits many lower heat wraps. This indent is for ceramic fiber tape when the method already calls for the higher ceramic temperature window, not glass tape.
Signature Ceramic Fiber Tape is white ceramic fiber tape sold per kilogram under Ceramic Products. It is not fiberglass tape, and it is not ceramic fiber fabric sold by the square metre.
Put it on the workplaces this tape is listed for.
- Furnace and kiln pipe and line wrap: coils cut for hot lines and short wrap runs beside the furnace face.
- Boiler sealing and high-temperature gasket detail: flange and joint wraps that need a ceramic tape face.
- Refractory and ceramic industry maintenance: outage kits that stock white ceramic tape for repair windows.
- Foundry, steel, and power plant heat zones: wraps and bundling where ceramic tape is named on the method.
- Cable and hose bundling where ceramic tape is specified: short bundling jobs that stay inside the ceramic programme.
Walk the duty before you raise the indent. Outside a Dehradun shed the morning air can feel mild. Beside a Selaqui boiler flange or a kiln line, the heat band does not follow the weather report. Write whether the job is a flange seal, a pipe wrap, or a bundling run, and whether the method already names ceramic tape. Note the width the fitter can still pull tight around the joint — a coil that is too wide for the flange face will sit proud and lift.
If the drawing already calls for Signature Fiberglass Tape or Signature Ceramic Fiber Fabric, stop. Those are different SKUs. Swapping glass tape for ceramic tape, or fabric for tape, breaks the method.
On the indent, write the job in plain words, such as “Selaqui boiler flange wrap, ceramic fiber tape by KG”. That line stops the wrong form leaving stores.
Match DSZCTP width to the wrap

Write the model the way the catalogue lists it. Signature Ceramic Fiber Tape is sold per kilogram. Colour is white. Every model lists working temperature 1260 °C to 1760 °C. Coils are 30 metre rolls. Pick the width × thickness that matches the flange or line you are wrapping — there is no custom size between the listed builds.
Choose the size for the duty in front of you. Primary catalogue pick for many plant indents is DSZCTP3.25.
- DSZCTP3.25 / DSZCTP3.38 / DSZCTP3.40 / DSZCTP3.50 / DSZCTP3.75 / DSZCTP3.100 — 3 mm section, widths 25–100 mm
- DSZCTP5.25 / DSZCTP5.38 / DSZCTP5.40 / DSZCTP5.50 / DSZCTP5.100 — 5 mm section, widths 25–100 mm (no 75 mm on the 5 mm section)
- Each model lists an approximate metres-per-kilogram guide — for example DSZCTP3.25 notes about 25 m per kg, and wider or thicker builds give fewer metres per kg
Order by the kilograms your wrap needs, not by a city name. A boiler flange that needs a narrow 25 × 3 mm face and a kiln line that needs a 100 × 5 mm wrap can share the same family and still need different models. Do not indent fiberglass tape under this product name because the word “tape” matches.
Write the model number and the kilograms on the indent. A line that only says “ceramic tape Dehradun” will be guessed in stores.
Wrap the flange and store dry

Hand the insulation crew the model that matches the indent before the outage window opens. On a Selaqui boiler flange or furnace line, the wrap only works if the width, the temperature row, and the site method agree.
- Step 1: Match the model on the coil to the indent before anyone cuts.
- Step 2: Wrap the flange, pipe, or cable the way your site insulation procedure already says. Keep the tape flat and overlapped as that method names.
- Step 3: Secure the end the way your fastening method already uses. Do not leave a loose tail that can lift in draught.
- Step 4: After the job, return unused coil to a dry rack with the model written on the bin.
- Step 5: Inspect before every issue. Retire a coil if the weave is torn, oil-soaked, or contaminated for the next heat job.
Store coils dry. A cool hillside morning outside the estate does not mean the next outage can start with an unmarked damaged remnant from last week. If a quote arrives for fiberglass tape under this ceramic product name, stop — that is a sibling SKU with a lower temperature window.
Signature Ceramic Fiber Tape is made by Darshan Safety Zone in Ahmedabad, under the Signature brand. The company has made fire safety and heat protection products since 2012, and its quality system is certified to ISO 9001:2015. Orders can be dispatched across India, including to a site in Dehradun, and freight is confirmed in the quotation. There is no counter in Dehradun, and there is no same-day promise.
If the wrap lifts at an overlap after fitting, reseal it the way your method says. Do not leave a gap and call the insulation done.

Discussion (0)
Join the conversation
Sign in to leave a comment for our applications team.
Sign in to comment