Darshan Safety Zone
Back to Insightsfurnace ceramic fabric
Stock Furnace Ceramic Fabric
In this article
A furnace ceramic fabric is the white ceramic cloth you wrap when a Selaqui boiler bay or foundry face needs extreme heat insulation by the metre.
You may be writing the indent for a Dehradun industrial-belt furnace line, a process pipe rack, or a stores desk that keeps ceramic cloth for outage wraps. The fabric does not change with the pin code. Match thickness, metallic or non-metallic build, and the square metres your method needs.
Jobs this fabric covers on Selaqui lines

You are the person who names the cloth on the requisition for a Selaqui furnace line or a Dehradun boiler-house wrap. Fiberglass cloth suits many heat jobs. This indent is for ceramic fiber fabric when the temperature window and the method already call for ceramic, not glass.
Signature Ceramic Fiber Fabric is white ceramic fiber cloth sold per square metre under Ceramic Products. It is not a ceramic fire blanket piece, and it is not the graphite-coated ceramic sibling.
Put it on the workplaces this fabric is listed for.
- Furnace and foundry insulation wraps and barriers: cloth cut for hot faces, doors, and short radiant paths.
- Extreme high-temperature ceramic fabric programmes: plant methods that stock ceramic cloth as the insulation face.
- Steel plant and heavy engineering heat zones: wraps and barriers beside process heat that outruns ordinary glass cloth.
- Sites choosing metallic vs non-metallic 3.0 mm builds: the same thickness with different construction labels for the method.
Walk the duty before you raise the indent. Outside a Dehradun shed the morning air can feel mild. Beside a Selaqui boiler door or a foundry wrap, the heat band does not follow the weather report. Write whether the job is a furnace wrap, a pipe insulation face, or a barrier panel, and whether the method already names ceramic cloth.
If the drawing already calls for Signature Ceramic Fire Blanket or Signature Graphite Coated Ceramic Fabric, stop. Those are different SKUs. Swapping roll fabric for a blanket piece, or graphite-coated cloth for this white ceramic line, breaks the method.
On the indent, write the job in plain words, such as “Selaqui furnace wrap, ceramic fiber fabric by SQM”. That line stops the wrong form leaving stores.
Match DSZCF thickness to the heat

Write the model the way the catalogue lists it. Signature Ceramic Fiber Fabric is sold per square metre. Enter length and width in metres on the product page. Most reference rolls are 1 × 30 m; DSZCF6.0 is listed on a 1 × 20 m roll. Colour is white on every row.
Choose thickness, weight, and specification for the duty in front of you. Working temperature is listed per model.
- DSZCF1.5 — 1.5 mm, 800 GSM, SS Metallic Reinforced, 1000 °C to 1760 °C
- DSZCF2.0 — 2.0 mm, 950 GSM, SS Metallic Reinforced, 1000 °C to 1760 °C
- DSZCF3.0 — 3.0 mm, 1000 GSM, SS Metallic Reinforced, 1260 °C to 1760 °C
- DSZCF3.0P — 3.0 mm, 1500 GSM, SS Metallic Reinforced, 1260 °C to 1760 °C
- DSZCF3.0NM — 3.0 mm, 1000 GSM, Non Metallic Ceramic Cloth, 1260 °C to 1760 °C
- DSZCF4.0 / DSZCF5.0 / DSZCF6.0 — 4.0–6.0 mm, heavier GSM builds, 1260 °C to 1760 °C
Primary catalogue pick for many plant indents is DSZCF3.0. Use DSZCF3.0P when the method wants the same 3.0 mm thickness at the heavier 1500 GSM. Use DSZCF3.0NM when the method names non-metallic ceramic cloth instead of SS metallic reinforcement.
Order fabric as fabric. Do not indent a ceramic fire blanket under this product name because the DSZCF letters look familiar. The blanket sibling is a different category, unit, and form.
Write model number, specification, and L × W in metres. A line that only says “ceramic fabric Dehradun” will be guessed in stores.
Cut and wrap for the boiler bay

Hand the insulation crew the model that matches the indent before the outage window opens. On a Selaqui boiler bay or furnace face, the wrap only works if the cloth, the temperature row, and the site method agree.
- Step 1: Match the model and specification on the roll to the indent before anyone cuts.
- Step 2: Measure length and width in metres for the wrap or barrier. Keep the ceramic face where your insulation method already places it.
- Step 3: Cut cleanly. Avoid frayed edges that shed fibre into the bay. Finish edges the way your wrapping or fastening method already uses.
- Step 4: Fit the piece so it sits flat on the pipe, duct, or furnace face without open gaps at the overlaps your procedure names.
- Step 5: Inspect reinforcement, cut edges, and the cloth face before every reuse. Retire a piece if the weave is torn, the metallic reinforcement fails, or the cloth is contaminated with oil.
Store rolls dry, on a rack, with the model written on the bin. A cool hillside morning outside the estate does not mean the next outage can start with an unmarked damaged remnant from last week. If a quote arrives for a ceramic fire blanket under this fabric name, stop — that is a sibling SKU, not this SQM cloth.
If the wrap lifts at an overlap after fitting, reseal it the way your method says. Do not leave a gap and call the insulation done.
Made in Ahmedabad, sent to site

Signature Ceramic Fiber Fabric is made by Darshan Safety Zone in Ahmedabad, under the Signature brand. The company has made fire safety and heat protection products since 2012, and its quality system is certified to ISO 9001:2015.
Orders can be dispatched across India, including to a site in Dehradun, and freight is confirmed in the quotation. There is no counter in Dehradun, and there is no same-day promise.

Discussion (0)
Join the conversation
Sign in to leave a comment for our applications team.
Sign in to comment