Darshan Safety Zone
Back to InsightsAluminized Apron in Haridwar
Wear Aluminized Apron on Pour
In this article
A foundry apron is the silver front-body PPE you specify when a SIDCUL pour or furnace face puts radiant heat and splash risk on the chest.
You may be writing the indent for a casting bay on Haridwar’s industrial estate, a steel-line ladle path, or a glass-face job that still runs hot after the night shift. The apron does not change with the pin code. Match the pour duty, the layer model, and the way your site wears torso PPE.
Cover the chest on a SIDCUL pour

You are the person who names the PPE before the pour starts. On a SIDCUL estate in Haridwar the yard can feel mild. At the ladle path or furnace face, radiant heat and splash risk sit on the chest and belly of the person standing there. A full proximity suit is a different indent. An apron is front-body cover for that method.
Signature Aluminized Apron is torso heat-protective PPE with a pure aluminium foil coated silver face. Size is 24 × 36 inch. It is sold per piece. It is not a coat and it is not a fire proximity suit.
Put it on the jobs this apron is listed for.
- Foundry and pour duty: front-body cover beside molten-metal adjacent work.
- Steel and furnace faces: radiant heat on the chest during stand-by or inspection.
- Glass-line heat: short spells beside a hot production face.
- Maintenance in radiant zones: torso PPE when the method names an apron, not a suit.
Walk the bay before you raise the indent. Write whether the heat is radiant from an open face, whether splash risk sits in front of the worker, and whether a coat or proximity suit is already named on the method. A casting pour and a glass-face spell can share the same apron family and still need different layer models.
If the drawing already calls for Signature Fire Proximity Suit or Signature Aluminium Coat, stop. Swapping an apron in leaves arms and back uncovered.
On the indent, write the job in plain words, such as “SIDCUL pour, front torso”. That line stops the wrong garment leaving stores.
Choose the layer for pour duty

Thin city pages invent thickness in millimetres, a fixed kilogram weight, and a separate radiant figure up to 1200 °C. Stay on the model row. Signature Aluminized Apron is sold per piece (NOS) in four layer builds. Size is 24 × 36 inch on every row. Colour is silver. Coating is pure aluminium foil coated. Working temperature on every model is 600 °C to 800 °C.
- DSZALAP2.0 — 2 Layer
- DSZALAP3.0 — 3 Layer
- DSZALAP4.0 — 4 Layer
- DSZALAP5.0 — 5 Layer
Layer count is the variant axis. Weight is listed as as per actual — do not invent a 1.2 kg figure to fill a form. The product is not customizable. Do not invent a fifth size or a private thickness.
Ask the pour lead how long the worker stands at the hot face and how close they stand. A short inspection and a long pour shift are not the same duty, even on the same SIDCUL plot. Put the model number on the indent with the size and the temperature window.
If your site PPE procedure already names a layer count, copy that model. Do not drop a layer to make the apron feel lighter.
Keep apron off the suit indent

Haridwar lockers often hold a proximity suit and an apron in the same silver colour. Mixing names on the indent is how an apron leaves for a full-body stand-by, or a suit leaves for a pour that only named torso cover.
- Apron: Signature Aluminized Apron — front torso, 24 × 36 inch, models DSZALAP2.0 to DSZALAP5.0.
- Proximity suit: full-body radiant work under a different SKU and model series.
- Aluminium coat: coat-named methods, not an apron substitute.
Do not invent splash-test hours, radiant figures above the listed window, or a millimetre thickness that is not on the model row. The working temperature for this apron is 600 °C to 800 °C. If the method needs more cover than the chest and belly, change the product name.
Write the apron model only on this indent. Complete gloves, footwear, and other PPE the way your site procedure already says, on their own lines.
If a vendor quote still shows custom sizes or a 1.2 kg weight for this apron, ask for the DSZALAP layer model and the 24 × 36 inch size instead.
Strap square, foil out, then check

The apron only helps if the foil face looks at the heat and the panel sits square on the chest for the whole pour. Hand the wearer the model with the garment, not after they have already stepped to the ladle path.
- Step 1: Match the model tag to the indent before anyone puts the apron on.
- Step 2: Wear it over the work clothing your site PPE procedure already names. Keep the silver foil face outward.
- Step 3: Fasten so the 24 × 36 inch panel sits square on the chest and belly. A twisted panel leaves clothing bare to heat or splash risk in front.
- Step 4: Check that arms stay free for the task. This is an apron, not a coat. If the method needs arm cover, stop and get the coat or suit named on the method.
- Step 5: After the first heat spell, look again. Inspect seams and foil. Retire the piece if the foil is torn, delaminated, burned through, or cracked from hard folds.
Store dry, flat or loosely hung, with the model written on the bin. Do not patch radiant PPE with tool-crib tape. A cool morning outside the estate does not mean the next pour can start with an unmarked silver panel.
If the foil face is inward, stop the job and reverse the apron before anyone steps back to the hot face.
Made in Ahmedabad, sent to site

Signature Aluminized Apron is made by Darshan Safety Zone in Ahmedabad, under the Signature brand. The company has made fire safety and heat protection products since 2012, and its quality system is certified to ISO 9001:2015.
Orders can be dispatched across India, including to a site in Haridwar, and freight is confirmed in the quotation. There is no counter in Haridwar, and there is no same-day promise.

Discussion (0)
Join the conversation
Sign in to leave a comment for our applications team.
Sign in to comment