Signature Heat Insulation Cover · Duqm
Heat insulation covers for Duqm refinery pipes, valves and flanges
Refinery and project-supply buyers in Duqm cover hot pipes, valves, flanges and equipment shells with Signature Heat Insulation Cover. The model is DSZHIC, sold by the square metre. The listing names no temperature, fabric, coating, colour, thickness or weight. A 25 mm run beside the cover is insulation tape, model DSZSFG0.6. We make the cover at our Ahmedabad factory and ship it on the order.
Tape stays on the 25 mm run
DSZSFG0.6 is silicone-coated fiberglass tape, gray, 0.6 mm, 25 mm by 20 m, 1 kg a roll, listed at 550 °C to 900 °C, and sold by the kilogram. That band is the tape's. DSZHIC lists no temperature. The two products are quoted separately.
Where Duqm project supply uses the cover
The refinery, the export pipelines to the liquid jetty, the liquid bulk tanks, and heavy and petrochemical equipment beside the port. DSZHIC is the cover. The tape is only the narrow run.
| Place | Setting | Cover job | Start with |
|---|---|---|---|
| The refinery | A petroleum-sector refinery inside the Special Economic Zone at Duqm, in Al Wusta Governorate. The zone covers 2,000 square kilometres and 90 kilometres of coastline. | Covers on hot pipes, valves and flanges. Each surface is square metres of DSZHIC. | DSZHIC by the square metre, with the metal temperature |
| Export pipeline corridor | A service corridor about 6 kilometres long and 37.2 metres wide, built so product-export pipelines can run from the refinery to the liquid jetty. | Covers on those export lines. A 25 mm finish beside a flange is the tape. | DSZHIC on the pipe. DSZSFG0.6 if the run is 25 mm |
| Liquid bulk tanks | Storage tanks, jetties and berths on the port lee breakwater, for crude coming in and finished refinery liquids going out. | Covers on equipment shells and flanges at the tanks. The cover listing still has no °C figure. | DSZHIC by the area of the shell |
| Heavy and petrochemical plant | The port is the focal point for heavy and petrochemical industry in the zone, with an oil berth for refined liquid products. | Covers on hot equipment. The narrow wrap beside a cover stays on the tape page. | DSZHIC on the shell. DSZSFG0.6 on the 25 mm run |
What the listing states
One model. Order it by area. Our guide to reading temperature ratings applies to a band a listing actually prints. DSZHIC prints none. The 550 °C to 900 °C band is on Signature Insulation Tape.
| Field | Listed for DSZHIC |
|---|---|
| Model | DSZHIC. One model. Made at the Ahmedabad factory. |
| Where it sits | Hot pipes, valves, flanges and equipment shells |
| Order unit | Square metre. Enter the area of the surface. |
| HSN | 70191900. The face fabric is not named. |
| Working temperature | Not listed. Send the metal temperature with the area. |
| Colour, coating, thickness, weight | Not listed. |
| Custom outline | Not listed. DSZHIC is not a customizable model. |
| Order | Request quoteOpen product |
Lines on the Duqm quotation
Catalogue prices stay on the product cards. The quotation is how a Duqm buyer orders. It confirms the DSZHIC area, any DSZSFG0.6 kilograms, and shipment from Ahmedabad.
Line 1
Model
DSZHIC for the cover. DSZSFG0.6 only when a 25 mm run sits beside it.
Line 2
Square metres
The surface of each pipe, valve, flange or equipment shell.
Line 3
Metal temperature
Required on the quotation. DSZHIC lists no °C figure.
Line 4
The place
The refinery, the export pipeline corridor, the liquid bulk tanks, or heavy and petrochemical equipment.
Line 5
Narrow runs
Kilograms of DSZSFG0.6. One roll is 25 mm by 20 m and 1 kg, listed at 550 °C to 900 °C.
Line 6
Dispatch
The quotation confirms shipment from Ahmedabad and the production schedule.
On the fitting, and back in the store
Step 1
On the fitting
Set DSZHIC on a clean, dry pipe, valve, flange or shell. Secure it the way the site insulation procedure requires.
Step 2
Before the next fit
Look for tears, burn marks or contamination. Oil on a cover can smoke when the line heats. A damaged cover leaves service.
Step 3
In the project store
Keep covers dry, away from oils and sharp edges, until the next Duqm surface is measured.
Made in Ahmedabad, shipped on the order
Darshan Safety Zone manufactures Signature Heat Insulation Cover at our Ahmedabad factory (401 & 402, Golden Plaza, Amar Jawan Circle, Nikol -, Ahmedabad, India). Duqm has no Darshan Safety Zone warehouse, branch or shelf, and we do not state an Oman arrival day. Transit follows the freight and customs path on the quotation. The cover ships on that order.
Import duties and customs are yours. Availability depends on the product category and on the regulations that apply to the shipment. Project quantities follow the production schedule on the quotation. Our shipping and delivery policy covers how an order leaves the factory. The quotation confirms dispatch.
Guides for Duqm refinery and project supply
Insulation cloths
The Signature range that holds this cover and the tape for a 25 mm run.
Browse insulation clothsReading temperature ratings
How a printed band is read. DSZHIC lists none. DSZSFG0.6 lists 550 °C to 900 °C.
Open guideOil and gas
Refinery and project supply, where this cover goes on hot pipes, valves and flanges.
Open industry journeyTalk to our team
Use this while the square metres for a Duqm fitting are still being taken off the drawings.
Open contact form
Questions from Duqm refinery and project buyers
What cover do we order for a hot valve at the Duqm refinery?
DSZHIC, Signature Heat Insulation Cover, by the square metre of the pipe, valve, flange or equipment shell. The category is Insulation Cloths. HSN 70191900. The listing prints no working temperature, fabric, coating, colour, thickness or weight.
Why does the cover listing have no temperature?
DSZHIC has no printed °C figure. Send the metal temperature with the square metres. The 550 °C to 900 °C band is printed on the insulation tape, model DSZSFG0.6, and it belongs only to that tape.
When does the 25 mm run take tape?
When the piece beside the cover is 25 mm wide. DSZSFG0.6 is silicone-coated fiberglass tape, gray, 0.6 mm, 25 mm by 20 m, 1 kg a roll, listed at 550 °C to 900 °C, sold by the kilogram. It has its own product page. The cover stays on the wider surface.
Can we order a valve outline, Velcro or a zipper on DSZHIC?
No. DSZHIC is not a customizable model. Velcro, zippers, layers and a bespoke outline are not listed. Quote the square metres. The site procedure decides how the cover is held on the fitting.
What fabric faces the cover?
Not listed. HSN 70191900 is the glass-fibre goods heading. The face fabric, any coating, the colour, the thickness and the weight stay unnamed. The cover is ordered as DSZHIC by area.
Are hazardous-area or civil-defence approvals listed?
No. Neither approval is listed on DSZHIC or on DSZSFG0.6. Darshan Safety Zone holds ISO 9001:2015 for the company quality system. That is a company quality-system certificate, and it is not a product approval for this cover.
Is there a warehouse in Oman or a stated arrival day?
We manufacture in Ahmedabad and ship on the order. There is no warehouse, branch or shelf in Duqm or elsewhere in Oman, and we do not state an Oman arrival day. Transit follows the freight and customs path confirmed on the quotation. The cover ships on that order.
Who pays duty and customs?
Import duties and customs are yours. We do not quote a landed cost here. Availability also depends on the product category and on the regulations that apply to the shipment.
What does a Duqm project quotation need?
Square metres of DSZHIC, the fitting (pipe, valve, flange or equipment shell), and the metal temperature. Name the place: the refinery, the product-export pipeline corridor to the liquid jetty, the liquid bulk tanks, or heavy and petrochemical equipment beside the port. Add kilograms of DSZSFG0.6 when a 25 mm run sits beside the cover. Project quantities follow the production schedule on the quotation.
How is the cover fitted, and when does it leave service?
Place DSZHIC on a clean, dry surface and secure it the way the site insulation procedure requires. Before it is reused, look for tears, burn marks or contamination. Oil on a cover can smoke when the line heats. A damaged cover leaves service. Keep covers dry, away from oils and sharp edges.
Quote a heat insulation cover for Duqm
Send the square metres and the metal temperature. We quote shipment from the Ahmedabad factory.