Darshan Safety Zone

Back to Insights

industrial fire blanket

Cover Hot Work with Fire Blanket

eadmin maMarch 24, 20265 min read
White Signature Fire Blanket ready beside a weld bay
In this article

An industrial fire blanket is the white E-glass cover you keep at a SIDCUL weld bay when sparks need a smothering sheet, not a powder extinguisher.

You may be writing the indent for a fabrication shed in Haridwar’s industrial estate, a grinding bay on night shift, or a plant maintenance programme that stocks blankets for fire-watch. The product does not change with the pin code. Match the heat job, the DSZFG thickness, and the length and width you need.

Jobs this blanket covers on SIDCUL

White fiberglass fire blanket staged for SIDCUL hot work

You are the person who has to name the cover on the requisition. On a SIDCUL estate in Haridwar the job is often a weld bay, a grinding pad, or a short hot-work window where sparks and slag need a smothering sheet within arm’s reach of the fire-watch post.

Signature Fire Blanket is the base white E-glass fiberglass fire blanket family. It is uncoated. It is not the silicon-coated sibling, and it is not the ceramic blanket. It is also not a vehicle cover — that is a different product.

Put it on the workplaces this blanket is listed for.

  • Welding and grinding: spark and slag cover beside the bay during hot work.
  • Foundry and fabrication fire-watch: a sheet the watch stands with while metal stays hot.
  • Plant maintenance programmes: blankets stocked for outage and repair windows.
  • Workshop and warehouse stocking: piece stock for industrial emergency cover on site.

Walk the bay before you raise the indent. Write whether the blanket sits for spark catch, for fire-watch smothering, or for both. A fabrication shed that only needs spark cover and a night grinding pad that needs a thicker sheet can share the same family and still need different models.

If the drawing already calls for Signature Silicon Fire Blanket or Signature Ceramic Fire Blanket, stop. Those are different products. Do not send the uncoated white DSZFG line because the word “fire blanket” matches. Do not invent a kitchen certificate or a vehicle size on this SKU either.

On the indent, write the job in plain words, such as “SIDCUL weld-bay fire-watch cover”. That line stops the wrong piece leaving stores.

Match DSZFG thickness to the heat

Thin city pages often say “multiple sizes” and “certified to international standards”. Stay on the catalogue. Signature Fire Blanket is twelve DSZFG thickness models from 0.18 mm to 3.0 mm. Colour is white. Specification is E-glass or glassfiber material. There is no silicon or ceramic coating on this SKU.

Working temperature depends on the model you pick:

  • DSZFG0.18, DSZFG0.2, DSZFG0.3, and DSZFG0.5 list 550 °C to 900 °C.
  • DSZFG0.4, DSZFG0.6, and the thicker rows through DSZFG3.0 list 600 °C to 900 °C.
  • Primary catalogue pick for many plant indents is DSZFG0.6 at 0.6 mm and 430 GSM.

Sold per piece (NOS). On the product page you enter length and width in metres. The reference size on every variant is 1 × 2 metre — that is a panel reference, not a claim that only one fixed sheet exists. Order the L × W your bay method needs. Do not copy old sheets that invent 1.2 × 1.8 m or 1.8 × 1.8 m as catalogue SKUs, and do not paste a BS EN fire-rating hour that is not on the model list.

If the heat band or a coating requirement pushes you past this family, step up to the silicon or ceramic Signature blankets. Do not stretch an uncoated white sheet into a job those siblings were made for.

Write the model number and the length × width on the indent. A line that only says “fire blanket Haridwar” will be guessed in stores.

Deploy and leave it until cool

Hand the fire-watch the model that matches the indent before the first electrode is struck. The blanket smothers by covering the fire and cutting oxygen. Deploy it the way your site hot-work procedure already says — not the way a city blog lists four casual steps.

  • Step 1: Match the model and size on the piece to the indent before anyone opens the pack.
  • Step 2: Keep the blanket within arm’s reach of the fire-watch post, folded so the corners come free without fighting the wrap.
  • Step 3: Hold the edges to shield your hands, place the sheet gently over the fire or spark pile, and seal the edges so oxygen cannot feed under a gap.
  • Step 4: Leave it in place until the area is cool per your procedure. Do not peel early to “check”.
  • Step 5: After use, inspect for burn-through, frayed edges, or oil soak. Retire a damaged piece; do not fold it back into the bay kit.

Inspect before every issue. A cool morning outside the estate does not mean the next welding window can start with an unmarked offcut from last week. Store dry, with the model written on the bin. If a quote arrives for a car or EV cover under this product name, stop — that is the vehicle blanket line, not this industrial DSZFG family.

If the sheet lifts at a corner after deployment, reseal the edge. Do not spray powder under a half-lifted blanket and call the job done.

Made in Ahmedabad, sent to site

Signature Fire Blanket is made by Darshan Safety Zone in Ahmedabad, under the Signature brand. The company has made fire safety and heat protection products since 2012, and its quality system is certified to ISO 9001:2015.

Orders can be dispatched across India, including to a site in Haridwar, and freight is confirmed in the quotation. There is no counter in Haridwar, and there is no same-day promise.

Discussion (0)

Join the conversation

Sign in to leave a comment for our applications team.

Sign in to comment
No comments yet. Be the first to ask a specification question.

What do buyers ask before specifying?

Common questions on materials, applications, and plant fit.

What jobs is this blanket for on a SIDCUL site?
Welding, grinding, and hot-work spark cover; foundry and fabrication fire-watch; plant maintenance blanket programmes; and workshop or warehouse stocking for industrial emergency cover. It is not the vehicle fire blanket line.
Which model should I write on the indent?
Pick a DSZFG thickness that matches the heat window on the model row. Many plant indents use DSZFG0.6. Add length and width in metres. Do not order by a city name alone.
Is this the same as Signature Silicon Fire Blanket?
No. This family is uncoated white E-glass. Silicon-coated DSZSFG and ceramic DSZCF are separate Signature blankets. Follow the name on the drawing before stores raises the indent.
Can I claim a BS EN rating or a two-hour fire rating?
No. Those claims are not on the current model list. Darshan Safety Zone is ISO 9001:2015 certified as a company. That is not a product fire-rating certificate for this blanket.
How do I order size?
Sold per piece. Enter length and width in metres on the product page. The 1 × 2 metre figure on each variant is a reference size, not a fixed-only catalogue story.
What should I check before the next shift issues it?
Look for burn-through, frayed edges, or oil soak. Retire a damaged piece. Store dry with the model written on the bin so the next fire-watch does not open an unmarked offcut.
Do you keep stock in Haridwar for same-day issue?
No. Manufacturing is in Ahmedabad. Signature products can be dispatched across India, and freight is confirmed in the quotation. There is no local warehouse promise.

Ready to specify this for your plant?

Request a quote on welding protection, fire blankets, PPE, and high-temperature insulation — or browse the factory catalog.

Closely related products, categories, and guides to continue your specification journey.