Darshan Safety Zone

Back to Insights

car fire blanket

Stage Car Fire Blanket Ready

Gk Sir 2March 25, 20265 min read
Grey Signature Car Fire Blanket staged ready for vehicle parking
In this article

A car fire blanket is the 8 × 6 metre grey sheet you stage when a Rishikesh hotel forecourt or hillside parking bay faces a vehicle fire.

You may be writing the indent for a resort parking locker along the Ganga corridor, a taxi fleet yard, an EV charging bay, or a workshop that keeps a vehicle blanket for night recovery. The product does not change with the pin code. Match Standard or Premium, store it where responders can reach it, and deploy it the way your site emergency procedure already says.

Jobs this blanket covers on Ganga parking

Grey Signature Car Fire Blanket ready beside a parking safety point

You are the person who names the vehicle blanket on the requisition for a Rishikesh hotel forecourt, a hillside parking deck, or a travel-fleet yard. An industrial hot-work blanket is a different product. This indent is for a full vehicle fire blanket when the method already calls for covering a car, not a weld bay.

Signature Car Fire Blanket is a vehicle fire-suppression blanket under Vehicle Fire Blanket. It is grey, both-side silicon coated, fixed at 8 × 6 metre, and sold per piece. It is not Signature Silicon Fire Blanket or Signature Ceramic Fire Blanket.

Put it on the workplaces this blanket is listed for.

  • Parking structures, forecourts, and confined vehicle storage: resort and hotel bays where cars sit close and access for appliances can be slow.
  • EV and hybrid charging bays and fleet depots: charging posts and fleet parks that stock a named vehicle blanket in the emergency kit.
  • Automotive workshops, recovery, and tow yards: yards that keep a blanket ready for a vehicle fire during repair or recovery.
  • Emergency response kits where appliance access is limited: sites that need oxygen cut-off cover before a full appliance arrives.
  • Fleet HSE programmes stocking named DSZCFB blankets: taxi and travel fleets that write the model on the kit list.

Walk the duty before you raise the indent. Along the Ganga corridor a calm evening outside the lobby can change fast when a parked car or charging bay needs a full cover. Write whether the blanket sits at the forecourt locker, the EV bay, or the workshop kit, and whether responders are trained to deploy it.

If the drawing already calls for an industrial Signature Silicon Fire Blanket or Signature Ceramic Fire Blanket, stop. Those are different categories and sizes. Swapping a weld-bay blanket for a vehicle blanket, or the other way round, breaks the method.

On the indent, write the job in plain words, such as “Ganga-corridor hotel forecourt vehicle blanket, 8 × 6 m”. That line stops the wrong form leaving stores.

Pick Standard or Premium DSZCFB

Folded grey car fire blanket on a hotel parking safety rack

Write the model the way the catalogue lists it. Signature Car Fire Blanket is sold per piece (NOS). Both models are grey, both-side silicon coated, and fixed at 8 × 6 metre. There is no custom length and width on the buy box — confirm the storage footprint before you raise the indent.

Choose Standard or Premium for the duty in front of you.

  • DSZCFB0.6 — Standard, 0.6 mm, 520 GSM, working temperature 650 °C to 900 °C
  • DSZCFB0.8P — Premium, 0.8 mm, 550 GSM, working temperature 1100 °C to 1800 °C

Both rows list the same specification line: waterproof, weatherproof, chemical proof, anti static, and reusable material. Weight on the model row is fabric GSM, not a bag mass. Only these two builds are offered.

Match the temperature duty your HSE method already signed. A hotel forecourt kit and a workshop recovery kit can share the same product family and still need different models. Order the vehicle blanket as the vehicle blanket — do not indent an industrial DSZSFG or DSZCF fire blanket under this name because the letters look familiar.

Write the model number and “8 × 6 metre” on the indent. A line that only says “car blanket Rishikesh” will be guessed in stores.

Cover the vehicle and leave it

Responders unfolding a grey Signature Car Fire Blanket in a drill

Stage the blanket where trained responders can reach it — the forecourt locker, the EV bay kit, or the workshop wall. Deploy it the way your site vehicle-fire procedure already says. The blanket works by covering the vehicle and cutting oxygen to the fire.

  • Step 1: Match the model on the pack to the indent before anyone opens it.
  • Step 2: Pull the blanket from storage and hold the edges so your hands stay protected the way your drill already teaches.
  • Step 3: Place the sheet over the vehicle to get full coverage. Keep a safe stand-off and follow the emergency call-out your site already uses.
  • Step 4: Leave the blanket in place until the area is cool per your procedure. Do not peel early to “check”.
  • Step 5: After use, inspect for burn-through, torn edges, or coating damage. Return it to service only when the material is intact under your site reuse policy.

Train the night shift as well as the day desk. On a hillside parking bay after tourist traffic fades, the person who finds the fire may be the night watch, not the morning HSE officer. Store the packed blanket dry, with the model written on the locker. If a quote arrives for a 1 × 2 m industrial fire blanket under this product name, stop — that is a sibling line, not this 8 × 6 m vehicle blanket.

If a corner lifts after deployment, reseal the edge. Do not leave a gap open and call the cover done.

Made in Ahmedabad, sent to site

Packed Signature Car Fire Blankets ready for warehouse dispatch

Signature Car Fire Blanket is made by Darshan Safety Zone in Ahmedabad, under the Signature brand. The company has made fire safety and heat protection products since 2012, and its quality system is certified to ISO 9001:2015.

Orders can be dispatched across India, including to a site in Rishikesh, and freight is confirmed in the quotation. There is no counter in Rishikesh, and there is no same-day promise.

Discussion (0)

Join the conversation

Sign in to leave a comment for our applications team.

Sign in to comment
No comments yet. Be the first to ask a specification question.

What do buyers ask before specifying?

Common questions on materials, applications, and plant fit.

Which jobs on a Rishikesh parking site need this blanket?
Hotel and resort forecourts, hillside parking, EV charging bays, workshop and tow yards, emergency kits with limited appliance access, and fleet HSE programmes that stock a named vehicle blanket. It is not an industrial weld-bay fire blanket.
Which model should I write on the indent?
Choose DSZCFB0.6 Standard at 650 °C to 900 °C or DSZCFB0.8P Premium at 1100 °C to 1800 °C. Both are grey, both-side silicon coated, and fixed at 8 × 6 metre. Write the model number on the indent.
Is this the same as Signature Silicon Fire Blanket?
No. The car fire blanket is a Vehicle Fire Blanket SKU at 8 × 6 metre sold NOS. Industrial silicon and ceramic fire blankets are different categories and sizes. Follow the name on the method before stores raises the indent.
Can I order other vehicle sizes such as 6 × 9 m?
The current catalogue lists 8 × 6 metre on both models only. Confirm that footprint for storage and deployment. There is no custom length and width on the product page.
Who should deploy the blanket?
Trained responders following your site vehicle-fire procedure. Cover the vehicle, leave the blanket in place until the area is cool per that procedure, and call emergency services the way your site already requires.
What should I check after a drill or a real use?
Look for burn-through, torn edges, or coating damage. Return it to service only when the material is intact under your site reuse policy. Store the pack dry with the model written on the locker.
Do you keep stock in Rishikesh for same-day issue?
No. Manufacturing is in Ahmedabad. Signature products can be dispatched across India, and freight is confirmed in the quotation. There is no local warehouse promise.

Ready to specify this for your plant?

Request a quote on welding protection, fire blankets, PPE, and high-temperature insulation — or browse the factory catalog.

Closely related products, categories, and guides to continue your specification journey.