Darshan Safety Zone
Back to Insightsheat resistant proximity suit
Stock Fire Proximity Suit
In this article
A heat resistant proximity suit is the aluminized full-body kit you stock when a Selaqui furnace bay or city fire drill puts radiant heat on every side.
You may be writing the indent for a plant kit room on the Dehradun industrial belt, a city fire station stores locker, or a fabrication shed that still runs night drills after the monsoon. The suit does not change with the pin code. Match the radiant duty, the layer model, and the way your site dons full proximity PPE.
Jobs this suit covers in Selaqui

You are the person who names the PPE on the requisition for a Selaqui estate bay or a Dehradun fire station kit room. An apron covers the chest. A coat covers more of the torso. A proximity suit is for the job where radiant heat hits the whole body and the method already calls for a full suit, not a single accessory.
Signature Fire Proximity Suit is a full aluminized proximity suit with a pure aluminium foil coated silver face. It is free size. It is sold per piece. It is not the aluminium coat, the back-open coat, or the aluminized apron.
Put it on the workplaces this suit is listed for.
- Firefighting and emergency rescue proximity work: close approach drills and methods where the kit room stocks a full suit.
- Foundry, furnace, and steel-plant radiant zones: stand-by or short entry beside a hot face that needs full-body cover.
- Glass manufacturing and high-temperature process areas: spells where radiant heat is on every side of the worker.
- Petrochemical and industrial emergency lockers: sites that stock a proximity suit instead of coat-only coverage.
Walk the duty before you raise the indent. On the Dehradun belt a cool morning outside the shed can feel mild. At a Selaqui furnace door or a training prop, the radiant load does not follow the weather report. Write whether the job is a city fire drill, a furnace stand-by, or a rescue method, and whether coat-only PPE would leave arms, legs, or back bare.
If the drawing already calls for Signature Aluminium Coat or Signature Aluminized Apron, stop. Those are different SKUs. Swapping a suit in for an apron, or an apron in for a suit, breaks the method.
On the indent, write the job in plain words, such as “Selaqui furnace proximity stand-by, full suit”. That line stops the wrong garment leaving stores.
Write the DSZAL layer on the indent

Write the model the way the catalogue lists it. Signature Fire Proximity Suit is sold per piece (NOS) in four layer builds. Size is free size on every row. Colour is silver. Coating is pure aluminium foil coated. Working temperature on every model is 600 °C to 1000 °C.
Choose the layer count for the duty in front of you.
- DSZAL.2LS — 2 Layer, about 6 kg
- DSZAL.3LS — 3 Layer, about 8 kg
- DSZAL.4LS — 4 Layer, about 9 kg
- DSZAL.5LS — 5 Layer, about 10 kg
Weight rises with layers. A heavier build is not always the better pick for a short drill, and a lighter build is not always enough for a longer radiant stand-by. Match the layer to the method your HSE officer already signed.
Order the suit as the suit. Add head protection, gloves, and footwear from whatever your site PPE procedure already names for that job. Only these four free-size layer builds are offered — there is no custom size between them.
Write the model number on the indent. A line that only says “aluminized fire suit Dehradun” will be guessed in stores.
Dry the suit after Doon valley drills

In the Doon valley, kit rooms feel the monsoon. A suit that looks fine on a dry winter drill can pick up damp if it is stuffed wet into a closed locker after a night exercise. Treat moisture the same way you treat foil damage — as a reason to stop and check before the next issue.
- Step 1: Match the model on the suit to the indent before anyone opens the bag.
- Step 2: Keep the silver foil face outward toward the radiant heat source. Wear it over the base clothing your site PPE procedure already names.
- Step 3: Confirm free-size closures sit closed without fighting the wearer. If fit fails the method, stop the drill and rewrite the kit plan.
- Step 4: After the drill or stand-by, hang or lay the suit flat to dry before it returns to the locker. Do not bag a damp suit for the next shift.
- Step 5: Inspect seams, foil face, and closures before every issue. Retire the piece if the foil is torn, a closure fails, or the fabric is damaged.
Store dry, hung or flat, with the model written on the bin. A cool hillside morning outside the estate does not mean the next furnace window can start with an unmarked damaged suit from last week. If a quote arrives for a coat or apron under this product name, stop — those are sibling SKUs, not this full proximity suit.
If the foil face is dull, cracked, or peeling at a fold, retire the suit. Do not send it back into a Selaqui radiant zone because “it still looks silver from far away”.
Made in Ahmedabad, sent to site

Signature Fire Proximity Suit is made by Darshan Safety Zone in Ahmedabad, under the Signature brand. The company has made fire safety and heat protection products since 2012, and its quality system is certified to ISO 9001:2015.
Orders can be dispatched across India, including to a site in Dehradun, and freight is confirmed in the quotation. There is no counter in Dehradun, and there is no same-day promise.

Discussion (0)
Join the conversation
Sign in to leave a comment for our applications team.
Sign in to comment